The Ultimate Performance Rotary Screw Air Compressor
Sullivan Palatek CDF SAS Series: 5, 7.5, & 10HP
Rotary screw compressor, cool, clean air.
Compact design.
100 percent duty cycle.
2-year air end warranty.
Complete package with starter, air cooled oil cooler / aftercooler and protective devices for high temperature and low oil shutdown. Mounted air dryer and filter to eliminate moisture and contaminants.
|
| COMPRESSOR: | Oil flooded rotary screw, continuous duty, industrial air compressor. |
| ELECTRIC MOTOR: | 200/208/230/460/575 VOLT, 3-phase, open drip motor. Single phase 230 volt, 5, & 7.5 HP also available. |
| MOTOR STARTER: | Full voltage magnetic starter with 110 volt control. |
| CONTROLS: | Constant speed with two operating modes, continuous run or auto start/stop. |
| INSTRUMENTATION: | Line pressure gauge, operating temperature gauge, hour meter. |
| COOLING SYSTEM: | Air cooled oil cooler/aftercooler with Palasyn 45 (4000 hour) synthetic lubricoolant. Spin on type lube filter and air/oil separator for ease of maintenance. |
| AIR FILTER: | Replaceable dry type. |
| AIR DRYER: | SPRF: 23,29, or 47CFM Air Dryer for moisture removal. |
| AIRLINE FILTER: | Mounted for contaminant removal. |
| AIR RECEIVER: | 120 gal. with auto-drain, relief valve and pressure gauge. |
|
| MODEL CDF: 5, 7.5, & 10HP |
| Oil Reservoir Gapacity 1 Gal |
| Length 72” |
| Height 61” |
| width 26-114” |
| Weight (lbs.) 5HP 795 |
| Weight (lbs.) 7.5HP 845 |
| Weight (lbs.) 10HP 900 |
| Discharge Connection 1/2” N.P.T. |
Sullivan Palatek CDD / CDDE SAS Series: 5, 7.5, & 10HP
Rotary screw compressor, cool, clean air.
Compact design.
100 percent duty cycle.
2-year air end warranty.
Extended life mounted desiccant dryer to eliminate moisture and contaminants, -40F dew point.
Complete package with starter, air cooled oil cooler / aftercooler and protective devices for high temperature and low oil shutdown.
|
| COMPRESSOR: | Oil flooded rotary screw, continuous duty, industrial air compressor. |
| ELECTRIC MOTOR: | 200/208/230/460/575 VOLT, 3-phase, open drip motor. Single phase 230 volt, 5, & 7.5 HP also available. |
| MOTOR STARTER: | Full voltage magnetic starter with 110 volt control. |
| CONTROLS: | Constant speed with two operating modes, continuous run or auto start/stop. |
| INSTRUMENTATION: | Line pressure gauge, operating temperature gauge, hour meter. |
| COOLING SYSTEM: | Air cooled oil cooler/aftercooler with Palasyn 45 (4000 hour) synthetic lubricoolant. Spin on type lube filter and air/oil separator for ease of maintenance. |
| AIR FILTER: | Replaceable dry type. |
| AIR DRYER: | Desiccant air dryer / filter for moisture removal. Spin on replaceable cartridges with desiccant contained filter media enclosure. -40F dew point. |
| AIR RECEIVER: | 80 gal. with auto-drain, relief valve and pressure gauge. |
|
| MODEL | CDD | CDDE |
| Oil Reservoir Gapacity | 1 Gal | 1 Gal |
| Length | 69” | 69” |
| Height | 54” | 60” |
| width | 26.25” | 33” |
| Weight (lbs.) 5HP | 700 | 775 |
| Weight (lbs.) 7.5HP | 750 | 825 |
| Weight (lbs.) 10HP | 800 | 875 |
| Discharge Connection | 1/2” NPT | 1/2” NPT |
Sullivan Palatek CDD SAS Series: 15 - 30HP
Rotary screw compressor, cool, clean air.
Compact design.
100 percent duty cycle.
5-year air end warranty.
Extended life mounted desiccant dryer to eliminate moisture and contaminants, -40F dew point.
Complete package with starter, air cooled oil cooler / aftercooler and protective devices for high temperature and low oil shutdown. In line filter.
|
| COMPRESSOR: | Oil flooded rotary screw, continuous duty, industrial air compressor. |
| ELECTRIC MOTOR: | NEMA T-Frame, C-Frame, double shaft, ODP squirrl cage, induction type. Contact factory for voltage availability. Direct coupling to motor for positive alignment. |
| MOTOR STARTER: | Full voltage magnetic starter with 120 volt control. NEMA 1 enclosure, circuit breaker, transformer and 3 phase overload protector. |
| AIR INTAKE FILTER: | Multi-stage dry type with replaceable element. |
| CONTROLS: | Full modulation, electronically controlled for smooth operation and lowest possible no load power. Auto dull controll, timed stop or constant run. |
| INSTRUMENTATION: | Line pressure gauge, fluid reservoir gauge, hour meter, discharge temperature gauge, oil filter and separator element differential gauges. |
| COOLING SYSTEM: | Air cooled with air cooler/aftercooler and factory filled with Palasyn 45 (4000 hour) synthetic lubricoolant. Equipped with microfiber full flow oil filter. |
| AIR DRYER: | Desiccant air dryer and coalescing filter for moisture removal. Spin on replaceable cartridges designed for -40F dew point. |
| MOUNTING: | Base mounted, no special foundation required. Optional tank, platform, and accoustical enclosure available. Consult factory for dimensions and weights for optional equipment. |
|
| MODEL | BASE
PACKAGE | ENCLOSED
PACKAGE |
| Lubricant Reservoir Gapacity | 3 Gal | 3 Gal |
| Length | 58” | 77” |
| Height | 35” | 43” |
| width | 34” | 38” |
| Weight (lbs.) | 1050 | 1650 |
| Discharge Connection | 1” NPT | 1” NPT |
